Blue Flower

GN 5-DECK HIGH-FREQUENCY FINE VIBRATING SCREEN FOR DOMESTIC LITHIUM ORE SELECTION

High frequency sieve has high efficiency, small amplitude and high screening frequency. It is an effective equipment for screening and grading fine-grained materials, widely used in iron ore, tin, tungsten, tantalum, niobium sand and other beneficiation plants for screening or grading operations. For high frequency sieve, is alone to dewatering for the purpose of wet screening, it is hoped that as soon as possible on the screen surface to form a material layer with filtration effect, in order to block the passage of fine-grained coal, so as to reduce the loss of solid materials in the water, and to improve the recovery rate of solids. If the screen surface amplitude is too large, but destroy the filter layer. Therefore, wet screening does not require a large amplitude. In the case of vibration intensity that can be achieved, in order to increase the number of times the slurry on the screen surface acts relative to the screen surface and improve the transport capacity of the screen surface, it is desirable to use a higher vibration frequency, i.e., the favourable movement characteristics of the wet screening machine should be high frequency and low amplitude.

GN Separation's GND5Z1216 Features and advantages as below 

HIGH EFFICIENCY: High frequency vibrating screen can significantly improve the efficiency of screening or grading through its efficient design and operation, which is suitable for the processing of fine-grained materials and widely used in iron ore, tin, tin, tungsten, tantalum, niobium sand and other mineral processing plant screening or classification operations1.
Small amplitude: due to the design characteristics of high frequency vibrating screen, its amplitude is relatively small, which helps to protect the screen mesh and prolong the service life of the equipment, and is also conducive to the protection of the quality of the treated materials2.
High screening frequency: the vibration frequency of high-frequency vibrating screen can reach more than 24 Hz, and such high-frequency vibration helps to improve the transport capacity of the screen surface, thus speeding up the screening process1.
Reduce energy consumption and improve efficiency: high frequency vibrating screen can effectively reduce energy consumption in the process of operation, and at the same time improve the processing efficiency, which is important for improving production efficiency and reducing costs2.
High quality and long life: due to the structural design and material selection of high frequency vibrating screen, it ensures its high quality and durability, thus prolonging the service life of the equipment.

 

Pls contact GN to get more information.

 

GN separation recently has successfully completed the production of a batch of sludge vacuum pump, designed for use in wastewater treatment plants abroad. This marks the company's continued commitment to providing solutions to global water treatment challenges.

 2024.07.19 Sludge Transfer Vacuum Pump

Sludge vacuun pump, also called solid vacuum pump, it's 100% air driving, can tranfer sludge from one areas to another areas, it required air compressor.

GN solids vacuum pump is completely pneumatic and has no electric components, so it can be used in flammable and explosive environments and has passed ATEX certification. A typical application of the solids vacuum pump is to transport oily sludge from the sludge tank to the oily sludge treatment system as a cnveying device.

GN Separation's solids vacuum pump is known for its versatility and reliability. As a fully pneumatic unit, it is capable of handling a wide range of materials, including liquids, slurries, solid powders and granules. Its compact design and easy on-site installation make it ideal for a wide range of industries. 

There are 3 model for your optional, GNSP-10B, GNSP-20B and GNSP-40B, those handling capacity is respectively 10M3, 20M3 and 40M3 base on the water, It will be changed according to the material's solid content, viscosity, flowability and etc.

2024.07.19 Sludge Transfer Vacuum Pump

To help customer in model selection on solids vacuum pump, GN will support clients always. Pls feel free to contact GN at any time.

 

 

Introduction

GN Separation, a leading company in the field of separation equipment, proudly presents its 3 Phase Disc Stack Separator. This high-speed, stable, sealed, efficient, and automatic slag discharge 3-phase separation equipment is widely used for liquid-liquid-solid separation or liquid-liquid separation. Our products are known for their superior performance and reliability, making them a preferred choice across various industries. Here, we explore the diverse applications of the 3 Phase Disc Stack Separator in different sectors.

 

Read more: GN Separation: Applications of 3 Phase Disc Stack Separator in Various Industries

In the fast-paced world of industrial operations, efficiency and reliability are paramount. Vacuum pumps play a critical role in numerous industries by enabling the transfer of various materials, ranging from liquids to solids. This blog will delve into the application of vacuum pumps across different sectors and highlight the advanced features and benefits of GN Separation’s state-of-the-art vacuum pumps.

Read more: Optimizing Efficiency in Industrial Processes with GN Separation Vacuum Pumps

Decanter centrifuges are indispensable in the field of industrial solid-liquid separation, and among the many models available, the GNLW364 Decanter Centrifuge stands out for its exceptional performance and quality. Recently, this model has been selected for an overseas crystal salt dewatering project, further solidifying its reputation as a top-tier solution in this domain.

Read more: GNLW364 Decanter Centrifuge for Overseas Crystal Salt Dewatering Project

The GNDL303 Screw Press is manufactured from high quality materials including 304 stainless steel. This ensures durability and corrosion resistance, making it suitable for the demanding conditions of municipal sludge treatment plants.

One of the outstanding features of the GNDL303 Screw Press is its Variable Frequency Drive (VFD). This allows the operator to adjust the speed of the screw, thus providing the flexibility to adapt to different sludge concentrations and flow rates. By optimising the dewatering process, it helps to minimise energy consumption while maximising efficiency.

In addition, the GNDL303 Screw Press is designed with PVC pipework connections in accordance with US standards. This allows for seamless integration into existing pipework and ensures compliance with local regulations. As a result, installation time and costs are reduced while operational efficiency is increased.

Eventually, the GNDL303 Screw Press is a reliable and efficient solution for municipal sludge dewatering in the USA. With its durable construction, adjustable speed control and strict adherence to US standards, it is perfectly suited to meet the specific requirements of US municipal sludge treatment facilities.