2 sets 14 inch high quality decanter centrifuge was dispatch to the sea port from GN Solids Control Beijing factory this week. After 1 month sailing on the ocean, they will arrive South America to client's jobsite. The client will use it in his mud solids control system.
It is a 14 inch popular size 2-phase decanter centrifuge. The centrifuge is widely used for mud solids control and drilling waste management. It is also a very good choice for oily sludge processing projects.
Firstly, 14 inch centrifuge can be used in drilling fluids mud recycling system, to recovery the barite for reuse. In the case of the mud is weighted and it is not suitable for drilling activities, the 14 inch decanter centrifuge can be used to remove the fine solids, and enable the drilling fluids qualified for the mud system.
Secondly, the decanter centrifuge can be used after high G drying shaker and vertical cuttings dryer to treat the drilling cuttings from solids control system.
The cuttings from solids control system, especially from shale shaker, desander, desilter, mud cleaner, contains high quality usable drilling fluids. From one side, the usable drilling fluids are valuable. It is better to recovery as more as possible to save cost. From another side, the high percentage drilling fluids makes the liquid percentage is too much high, it is not convenient for movement, and also the oil content is too much higher, it is hazardous to the environment. It cannot be discharged. Decanter centrifuge is one of the essential equipment used to retreat the drilling cuttings.
Another popular application of decanter centrifuge is for oily sludge separation. There is a variable source of oily sludge: from refinery, from drilling, from tank cleaning, etc…The oily sludge with various percentage of solids and water. Decanter centrifuge will be used together with chemical dosing system to process the fine soil in the oily sludge.