Recently GN Company's Sludge Solids Transfer Pump received great attention among Indian Clients. The Pump can be widely used to transfer Sludge, Solids (sand, soil, and powder), Slurry, etc.

Please find Pump working video from linkage as follow:

https://www.youtube.com/watch?v=OuUWPKmtVr0

Working Principle about the Pump,

It is 100% air operation/driven, and air is always supplied by Air Compressor.

With supplying air to the Pump, the Pump creates Vacuum (negative pressure) inside Pump Body, by Venturi. So the sludge is sucked into Pump.

Air is still supplying, and with some valves open / close (automatically), the Air blows out of the sludge from the Pump.

So its working procedure is suction-discharge, suction-discharge, suction-discharge......

Both suction / discharge is 0~30 seconds adjustable.

Note:

There is no rotating part inside the Pump Body, it is totally empty. So it is low maintenance / breakdown.

Standard operating procedure of the Pump,

It is working automatically. Only Matter is to supply the Required Air for Pump.

For example, air Requirement for GNSP-10B is Pressure Request: 550~690Kpa (80~100PSI) & Air Demand: 4.3m3/minute (150CFM)

GN Technical Team now has developed 3 models of this Pump with different capacities, including 10, 20, 40m3/hour. (The capacity is calculated based on clean water)

It's acceptable to arrange Trial Test with clients’ sample by GN Pump within GN Factories, to check the performance during actual operation.

Best & Regards,

Kevin Liu

Regional Manager

GN Separation & Conveying

Hebei GN Separation & Conveying Equipment Co.,Ltd

Tel:+86-316-5276988/9 Fax:+86-315-5276990

Mob(WhatsApp/Wechat): +86-15810901775

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Web: http://www.gnseparation.com

Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)