GN Separation and Conveying Company has become a professional manufacturer of Centrifuge for 13 years, and now the Company has 3 factories, and is capable to manufacture Decanter Centrifuge with bowl diameter from 9~30inch, that is about 220~760mm, with treatment capacity ranging from 1~2m3/hour-120m3/hour.

GN Company already supplied Decanter Centrifuge to UK, Netherlands, and now GN Company received more attention from other clients about our Decanter Centrifuge within Europe.

The first main application for Decanter Centrifuge is for Dehydration, and it is about to separate the solid phase from the liquid phase in the suspension, and the less liquid phase in solid phase, the separation is better.

Regarding to the selection of Centrifuge model for clients' project, GN Company's Technical Department has suggestions as follow,

If solid phase concentration is high, the particles are rigid bodies or crystals, and the particle size is big, so we suggest Centrifugal Filter. If the particles are allowed to be broken, so we suggest Scraper Centrifuge. If the particles are not allowed to be broken, so we suggest Cold Pusher or Centrifugal force Unloading Centrifuge.

The dehydration performance is not only related with the material itself, but also related with the centrifuge's centrifugal force, separation time, pore size of thescreen, porosity and other parameters, as well as the material of the centrifuge, Ph, the particle characteristics and process requirements, etc.

If solid phase concentration is low, and the particle size is very fine, or it is amorphous mycelium, we suggest Three-Food Sedimentation Centrifuge or Decanter Centrifuge without filter. And the centrifugal factor, Length/Diameter ratio, flow rate, overflow radius are all selected based on particle size of solid and the difference of the specific gravity of Liquid and Solids. And if the particle size is very uneven, the coarse particles can be removed by sieving, and then dewatered by centrifuge.

If the specific gravity of solid phase and liquid phase is close, and particle size is bigger than 0.05mm, so we suggest Centrifugal Filter. And if the particle size is too fine, the filter will run seriously. And if the filter is too thin, so the dehydration performance will decrease, and the amorphous mycelia and solid particles containing oil would block the filter.

And if requirement treatment capacity is high, we suggest continuous processing machine.

Welcome to contact GN Sales Managers, and we would offer customized solution for your project.

Best & Regards,

Kevin Liu

GN Separation & Conveying

Tel:+86-316-5276988/9 Fax:+86-315-5276990

Mob(WhatsApp/Wechat): +86-15810901775

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Web: http://www.gnseparation.com

Address: No. 1 Zhongxun Road Dachang Chaobai River Industry Zone, Langfang, Hebei, China (Close to Beijing Int. Airport)