Air powered high pressures wash down pump, or commonly known as Pneumatic high Pressure wash pump. GN Solids Control can design and make the air powered flush pump. The pump is powered and driven by air engine, instead of motor engine. The air engine generates high pressure for the purpose of washing and flushing.
The entire system does not require electricity or gas to produce pressurized water. The required air source pressure is 7 bar (100psi). Clean and dry air should to feed to drive the pump and generate high pressure.
Simple air driven motor is used to turn the pump which conversely converts an ordinary garden hose pressure into a powerful 50 bar (725PSI) or 170bar (2465PSI) pressure. A 12 liter or 14 liter per min water flow allows for easy and productive pressure washing. GN designed and made high quality air powered high pressures wash down pump are light weight, economical on price, and easy to operate. The greatest advantage is its quiet operation and ability to use it in applications where gas and diesel powered machines are prohibited due to hazardous conditions such as in chemical, paint and nuclear plants, and also in mines and oil platforms and refineries.
GN designed and made high quality air powered high pressures wash down pump are widely used in oil and gas industry. As GN main business is oil and gas drilling mud recycling and drilling waste management.
The high quality air powered high pressures wash down pump can be used to flush shale shaker screens, or for tank cleaning jobs, especially in oily sludge separation field, and refinery waste treatment system, where the screens are easily to be blocked as the high-oil content waste material is with a very high viscosity, it is difficult to be removed and cleaned from screen, tank or other equipment.
During operate the air drive high pressure flush pump, please be note below points:
1) Always wear eye protection during operating or maintenance to the air drive wash pump.
2) Always turn off air supply and disconnect air supply hose before installation, disassembly, and maintenance, flushing, or adjusting any accessories of the pump.
Furthermore, GN Solids Control offer complete solution on the oily sludge separation and other kind of drilling waste management.